Water Help / Borehole water
Borehole water: common problems and which fix suits which
A borehole gives you your own supply, but you also become responsible for its quality. Start with a lab test, then match the fix to the problem.
| Problem | What you notice | Usual fix |
|---|---|---|
| Hardness and scale | White crust, scaled geyser elements, clogged showerheads | Softener or scale conditioner |
| Rust building up in the system | Rusty water after standing, rust flakes, blocked fittings | Corrosion protection, replacing worst pipes |
| Iron or manganese in the water | Orange or black stains where water dries | Iron-removal filter |
| Bacteria | Often nothing visible; shows up in a lab test | Disinfection, e.g. UV or chlorination |
| Sediment | Cloudy water, sand in strainers | Sediment filter |
| Smell (rotten eggs) | Sulphur smell, especially hot water | Specialist treatment |
Where our installer partner can help
Our installer partner deals with the first two rows: scale and rust building up in pipes and equipment. For bacteria, iron in the water, sediment or smell, speak to a water-treatment specialist who supplies filtration or disinfection.
Get a lab test first
A full analysis at a SANAS-accredited lab shows hardness, iron, bacteria and more in one go. Keep the report: it's your baseline for checking whether any treatment works.
Want someone to look at your water?
A local installer can check your setup and give you a quote.